OTOMOTİV MÜHENDİSLİĞİ BÖLÜMÜ SCIENCE CITATION INDEX (SCI) ve ENGINEERING INDEX (EI) KAPSAMINDAKİ DERGİLERDE YAYINLANAN MAKALELER

Yıl

Yayının Adı

Sınıf

Atıf Sayısı*

2010
Karabulut, H., Çınar, C., Öztürk, E., Yücesu, H.S., Torque and power characteristics of a helium charged Stirling engine with a lever controlled displacer driving mechanism, Renewable Energy, Vol. 35(1), pp.138-143, 2010.

SCI (B)

1

2010
Karabulut, H., Çınar, C., Aksoy, F., Yücesu, HS. Improved Stirling engine performance through displacer surface treatment, International Journal of Energy Research, 34(3), pp.275-283, 2010.

SCI (B)

-
2010
Okur, M., Akmandor, İ.S., Experimental investigation of hinged and spring loaded rolling piston compressors pertaining to a turbo rotary engine, Applied Therma Engineering, In Press, 2010
SCI (B)
-

2010
Celikten, İ., Koca, A., Arslan, M.A., Investigation of the effects of diesel fuel, rapeseed and soybean oil methyl esters on engine performance and emissions at different injection pressures, Renewable Energy,

SCI (B)

-

2010
Çınar, C., Can, Ö., Şahin, F., Yücesu, HS., Effects of premixed diethyl ether (DEE) on combustion and exhaust emissions in a HCCI-DI Diesel engine, Applied Thermal Engineering, Vol. 30(4), pp.360-365, 2010.

SCI (B)

-

2010
Gürü, M., Koca, A., Can, Ö., Çınar, C., Şahin, F., Biodiesel production from waste chicken fat based sources and evaluation with Mg based additive in a Diesel engine, Renewable Energy, Vol.35(3), pp.637-643, 2010.

SCI (B)

2

2010
Çelikten, İ., Koca, A. Arslan, M.A., “Investigation of the effects of diesel fuel, rapeseed and soybean oil methyl esters on engine performance and emissions at different injection pressures”, Renewable Energy,35: 814

SCI (B)

-

2010
Erşan, K., Önsoy, K., “Definition of power of starting motors for spark ignition engines (s.i.e.) as a function of engine volume”, Journal of the Faculty of Engineering and Artchitecture of Gazi University, 25:2

SCI (C)

-
2010
Erşan, K., Ar, İ., Tüfek, S., “Effect Of Humidification of Gases on First Home Constructed PEM Fuel Cell Stack Potantial”, G.U.Journal of Science, 23(1).
EI
  

2009
Halit Karabulut, Serdar Yucesu, Can Çinar, Fatih Aksoy, “An Experimental Study on the Development of a Beta type Stirling Engine for Low Moderate Temperature Heat Sources”, Applied Energy, 86(1): 68-73

SCI (B)

5

2009
Karabulut H., Aksoy F., Öztürk E., “Thermodynamic analysis of a type Stirling engine with a displacer driving mechanism by means of a lever”, Renewable Energy, 34(1): 202-208

SCI (B)

-

2009
Karabulut. H., Aksoy. F., Öztürk.,E. Thermodynamic analysis of a Beta type Stirling engine with a displacer driving mechanism by means of a lever, Renewable Energy, Vol. 34, pp. 202-208, 2009. 

SCI (B)

5

2009
Karabulut, H., Çınar, C., Aksoy, F., The Investigation of the Effect of Thermal Barrier Coating on the Performance of Stirling Engine, International Journal of Energy Research, Vol. 33, pp.267-273, 2009.

SCI (B)

-

2009
Karabulut, H., Çınar, C., Aksoy, F., Yücesu, H.S. Improved Stirling engine performance through displacer surface treatment, International Journal of Energy Research, Vol. 33(3), pp.267-273, 2009.

SCI (B)

-

2009
Karabulut, H., Yücesu, HS., Çınar, C., Aksoy, F., Construction and tests of a dish/Stirling solar energy unit, Journal of the Energy Institute, Vol. 82, No.3, 207-211, 2009.

SCI (B)

-

2009
Can, Ö., Çınar, C., Şahin, F., Ön karışımlı benzin dolgusunun HCCI-DI motorunda yanma ve egzoz emisyonlarına etkilerinin incelenmesi, Gazi Üniversitesi, Mühendislik Mimarlık Fakültesi Dergisi, Cilt:24(2), 229-236, (2009)

SCI (B)

-

2009
Çakır M. T., Sözen A., Yücesu H. S., “Türkiyenin Sosyo-Ekonomik Göstergeleri İle Enerji Göstergeleri Arasındaki İlişkinin Çok Değişkenli Veri Analizi İle İrdelenmesi” Internatıonal Relatıons, 5(20):27

SOC (C)

-

2009
Koç, M., Sekmen, Y., Topgül, T., Yücesu, H.S., “The Effects of Ethanol-unleaded Gasoline Blends on Engine Performance and Exhaust Emissions in a Spark-ignition Engine”, Renewable Energy, 34(10): 2101-2106

SCI (B)

-

2008
Ali Keskin, Metin Gürü, Duran Altıparmak, Kadir Aydın, “Using of cotton oil soapstock biodiesel-diesel fuel blends as an alternative diesel fuel”, Renewable Energy, 33: 553-557

SCI (B)

-

2008
Haşimoğlu, C., İçingür, Y., Özsert, Parlak, A, “Part Load Performance Characteristics of a LHR Diesel Engine Fueled with Biodiesel”, International Journal of Energy Research, 791

SCI (B)

-

2008
Çaynak, S., Gürü, M., Biçer, A., Keskin, A., Içingür, Y., “Biodiesel production pomace oilimprovement of its requirements by synthesized manganese additive”, Journal of Fuel, 88(3): 534-538

SCI (B)

2

2008
İlkılıç, C., Yücesu, H.S., “The Use of Cottonseed Oil Methyl Ester on a Diesel Engine”, Energy Sources Part A, 30
(8): 742-753

SCI (B)

-

2007
Koca, A., Bayrakçeken, H., Altıparmak, D., 2007, “Determination of brake force using artificial neural network”, Journal of Scientific and Industrial Research, 66:425-430

SCI (C)

-

2007
Altıparmak, D., Keskin, A., Koca, A., Gürü, M., 2007, Alternative fuel properties of tall oil fatty acid methyl ester-diesel fuel blends, Bioresource Technology, 98:241-246

SCI (A)

33

2007
Keskin, A., Gürü, M., Altıparmak, D., 2007, Biodiesel production from tall oil with synthesized Mn and Ni based additives: Effects of the additives on fuel consumption and emissions, Fuel, 86: 1139-1143.

SCI (A)

15

2007
Haşimoğlu, C., İçingür, Y., Özsert, İ., Salman, S., “Performance characteristic of a low heat rejection diesel engine operation with biodiesel”, Renewable Energy, 33(7): 1703-1715

SCI (B)

9

2007
Can Çınar, “Thermodynamic Analysis of an α-Type Stirling Engine with Variable Phase Angle”, Journal of Mechanical Engineering Science, 221(8): 949-954

SCI (C)

-

2007
Sözen, A., Yücesu, H.S., “Performance Improvement of Absorption Heat Transformer”, Renewable Energy, 32(2): 267-284

SCI (B)

-

2007
Yücesu, H.S., Sözen, A., Topgül, T., Arcaklıoğlu, E., “Comparative Study Of Mathematical And Experimental Analysis Of Spark Ignition Engine Performance Used Ethanol-Gasoline Blend Fuel”, Applied Thermal Engineering, 27(2-3): 358-368

SCI (B)

11

2007
Yücesu, H. S., İlkılıç, C., “Effect of Cotton Seed Oil Methyl Esther on the Performance and Exhaust Emission of a Diesel Engine”, Energy Sources Part A, 28 (4): 389-398

SCI (B)

-

2006
Karabulut, H., Yücesu, H.S., Çınar, C., “Nodal Analysis of a Stirling Engine with Concentric Piston and Displacer”, Renewable Energy, 31(13): 2188-2197

SCI (B)

4

2006
K Atashkari, N Nariman-Zadeh, A Jamali, Ismet Çelikten, “Experimental-based modeling and pareto optimization of indirect injection diesel engines”, Modelling and Simulation (ESM 2006),192

SCI (B)

-

2005
Erol Arcaklıoğlu, İsmet Çelikten, A diesel engine performance and exhaust emissions”, Applied Energy, 80(1):11-22

SCI (B)

20

2005
M. Ali Akçayol, Can Çinar, Artificial Neural Network Based Modeling of Heated Catalytic Converter Performance”, Applied Thermal Engineering, 25(14-15): 2341-2350

SCI (B)

10

2005
Can Çinar, Tolga Topgül, Murat Ciniviz, Can Haşimoğlu, “Effects of Injection Pressure and Intake CO2 Concentration on Performance and Emission Parameters on an IDI Turbocharged Diesel Engine”, Applied Thermal Engineering, 25(11): 1854-1862

SCI (B)

3

2005
Can Çinar, Halit Karabulut, “Manufacturing and Testing of a Gamma Type Stirling Engine”, Renewable Energy, 30(1): 57-66

SCI (B)

7

2005
Can Çinar, H. Serdar Yücesu, Tolga Topgül, Melih Okur, “Beta-Type Stirling Engine Operating at Atmospheric Pressure”, Applied Energy, 81(4): 351-357

SCI (B)

6

2005
İlkılıç, C., Yücesu, H. S., “Investigation of the Effect of Sunflower Oil Methyl Esther on the Performance of a Diesel Engine”, Energy Sources, 1225

SCI (B)

-

2005
Ataer Ö.E., Karabulut H., “Thermodynamic Analysis of a Vtype StirlingCycle Refrigerator”, International Journal of Refrigeration, 28 (2): 183-189

SCI (A)

11

2004
Can, Ö., Çelikten, I.,  Usta, N., “Effects of ethanol addition on performance and emissions of a turbocharged indirect injection Diesel engine running at different injection pressures”, Energy Conversion and Management, 45(15): 2429-2440

SCI (A)

41

2004
Sözen, A., Arcaklıoğlu, E., Özalp, M., Yücesu, H.S., “Performance Parameters of an Ejector-Absorption Heat Transformer”, Applied Energy, 80(3): 273-289

SCI (B)

3

2004
Altın, R., Çetinkaya, S., Yücesu, H. S., “Potential of Using Vegetable Oil as Fuel For Diesel Engine”, Energy Conversion and Management, 42(5): 529-538

SCI (A)

134

2003
Çelikten, İ., “An experimental investigation of the effect of the injection pressure on engine performance and exhaust emission in indirect injection diesel engines”, Applied Thermal Engineering, 23:2051

SCI (B)

-

2003
İçingür, Y., Altıparmak, D., “The analysis of effect of fuel injection pressurefuel cetane number on a DI Diesel engine emissions”, Turkish Journal of EngineeringEnviromental Sciences, 27:32767

SCI (B)

-

2003
İçingür, Y., Hasimoğlu, C., Salman, S., “Effect of Comprex Supercharging on Diesel Emissions”, Energy conversionManagement, 44 (11): 1745-1753

SCI (A)

-

2002
İçingür, Y., Altıparmak, D., “The Effect of Cetane NumberFuel Injection Pressure on a DI Diesel Engine PerformanceEmissions” , Energy conversionManagement, 443: 32767

SCI (A)

-

2002
Sözen, A., Altıparmak, D., Usta, H., 2002 , “Develpoment and Testing of a Prototype of Absorbtion Heat Pump System Operated by Solar Energy”, Applied Thermal Energy,22:1847-1859

SCI (B)

19

2002
Gürü,M., Kaya,U., Altıparmak, D .,Alıcılar,A., 2002 , “Improvement of Diesel fuel properties by using additives” Energy Conversion and  Managment,43:1021-1025

SCI (A)

18

2000
Karabulut. H., Yücesu.S., Koca.A, “Manufacturing Testing of a VType Stirling Engine”, Turkish Journal of Engineering Environmental Science,

EI

3

1998
Karabulut, H., Ataer Ö.E. “Numerical solution of boundary layer equations in compressible cross flow to a cylinder”, Int. J. Heat Mass Transfer,  41(17):2677-2685

SCI (A)

4
1998
Erşan, K., “Determination of the effect of pedal forces on the breake linings comercially available as the old, new and different ones” , Journal of the Faculty of Engineering and Architecture of Gazi University, 13(1).
EI
  

1996
Karabulut, H., Ataer, Ö.E., “Numerical Analysis of Laminar Filmwise Condensation”, International Journal of Refrigeration, 19(2): 117-123

SCI (A)

9

1994
Karabulut, H., Altıparmak,D. ,Uyarel,A.Y.,  : A Numerical Study on Compressible Laminar Boundary Layer Flows. Journal of Thermal Sciences and Technology , 17(2):9-17

 

-

* : Web of Science’ye göre atıf sayıları, güncel rakamlar değişiklik gösterebilir.